AireRyder LK35454A/C-C Instruction Manual download pdf

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. The combined weight of your ceiling fan and light kit cannot exceed 35 pounds unless

additional support is provided for the fan.

LK35454

1. Remove the switch box cover from the switch

box of the fan by loosing the three switch box

screws.

2. Unscrew the center plug from the switch box

cover and discard it.

3. Secure the rod to nipple(-b).

4. Unscrew the bolt nuts from the set screws.

5. Attach a arm(-a) to the rod and a arm(-b)

according to the drawing of the package

by inserting the set screws, then secure it

with the bolt nuts.

Repeat with other arms(-a).

6. Attach nipple(-a) of the light kit to the

switch box cover, then secure it with a

washer and hex nut.

7. Cut the redundant wires if necessary. Pull

out the wires from the switch box. Make wire

connections using the wire nuts:

---The smooth (marked) wire from the fixture to the black (or blue) wire from the switch box.

---The ridged (unmarked) wire from the fixture to the white wire from the switch box.

Carefully tuck the wires back into the switch box.

8. Attach the switch box cover back to the switch box using the three switch box screws.

9. Attach the glass shades to the glass holders and secure them with the socket rings.

10. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

11. Turn on the power at the main fuse or circuit breaker box. (You can control the light with the pull chain.)

For Light Kit:

Center Plug

Smooth Wire

Wire Nut

Black or Blue Wire

Ridged Wire

White Wire

Switch Box

Motor

Hex Nut & Washer

Nipple(-a)

Switch Box Cover

Canopy

Switch Box Screw

Set Screw

Bolt Nut

Arm(-a)

Set Screw

Arm(-b)

Pull Chain

Fixture

Nipple(-b)

Rod

Bolt Nut

Socket Ring

Glass Shade

Glass Holder

060217

LK35454 --- Page 1

1 2

Summary of Contents

Page 1 - INSTRUCTIONS

ASSEMBLY AND INSTALLATION INSTRUCTIONSWARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUITBREAKER BOX BEFORE INSTALLING OR

Page 2 - Fixture Grounding Wire

Fixture WireChainMounting ScrewNipple(-c)Fixture Grounding WireCollarTop LoopLoopGrounding PadCapPipe(-b)CanopyMounting StrapGreen Grounding ScrewHex

Comments to this Manuals

No comments

AireRyder LK35454A/C-C Instruction Manual

Browse online or download Instruction Manual for Holders AireRyder LK35454A/C-C. AireRyder LK35454A/C-C Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Holders AireRyder LK35454A/C-C