AireRyder LK33012WP-C Instruction Manual download pdf

Fig.1

Motor

Switch Box

White Wire

Hex Nut

Screw

Switch Box Cover

Nipple(-a)

Fixture

Wire Nut

Washer

Center Plug

Black or Blue Wire

Black

1. Remove the switch box cover from the switch

box of the fan by loosing the three screws.

2. Unscrew the center plug from the switch box

cover and discard it.

3. For fan style that is shown in Fig.1: Attach the

nipple(-a) of the light kit to the hole of the

switch box cover, then thread the wires

through the washer and hex nut, then secure

them tightly.

4. For fan style that is shown in Fig.2: Thread the fixture wire through the switch box cover,

the washer and hex nut. Then attach the cap to the switch box cover, then secure it with

two set screws (6x32 20mmL).

5. Pull out the wires from the switch box. Make wire connections using the wire nuts:

---The black wire from light kit to the black or blue wire from the fan.

---The white wire from light kit to the white wire from the fan.

---Carefully tuck wires back into the switch box.

6. Restore the switch box cover back to the switch box using the three screws.

7. Thread the pull chain through the glass shade, washer and hex nut, then attach the glass

shade to the socket by inserting nipple(-b) and secure it with the washer and hex nut.

Thread the pull chain through the antler and finial, then attach the antler to the glass shade

by inerting nipple(-b) and secure it with the finial. (See Fig.3)

8. Install bulbs (not included). See relamping label at socket area or packaging for maximum

allowed wattage.

9. Turn on the power at the main fuse or circuit breaker box.

(You can control the lights with the pull chain.)



Fig.3

For Light Kit:

Motor

Socket

Nipple(-b)

Pull Chain

Glass Shade

Finial

Antler

Bottom Cap

Hex Nut

Washer

LK33012 --- Page 1

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. The combined weight of your ceiling fan and light kit cannot exceed 35 pounds unless

additional support is provided for the fan.

LK33012

(6 x 32 20mmL)

Set Screw

Fig.2

Cap

Nipple(-a)

Screw

Black or Blue Wire

Wire Nut

Black Wire

Hex Nut

Washer

Motor

Switch Box

White Wire

Terminal (Groove)

Terminal ( Tongue)

White Wire

Switch Box Cover

Plug

060217

1 2

Summary of Contents

Page 1 - INSTRUCTIONS

Fig.1MotorSwitch BoxWhite WireWhite WireHex NutScrewSwitch Box CoverNipple(-a)Fixture Wire NutWasherCenter PlugBlack or Blue WireBlack1. Remove the sw

Page 2

For Ceiling Light: (See Fig.4 & Fig.5) 1. Take out the the hex nut, washer, two bolt nuts, groudnig pad and canopy from the hardware p

Comments to this Manuals

No comments

AireRyder LK33012WP-C Instruction Manual

Browse online or download Instruction Manual for Household fans AireRyder LK33012WP-C. AireRyder LK33012WP-C Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Household fans AireRyder LK33012WP-C