AireRyder LK33053WP Instruction Manual download pdf

Fig.3

Motor

Switch Box

White Wire

Ridged Wire

Hex Nut

Screw

Switch Box Cover

Nipple

Light Kit

Wire Nut

Smooth Wire

Washer

Center Plug

Light Kit

Nipple

(6 x 32 20mmL)

Set Screw

Fig.4

Fig.2

Screw

Black(Blue) Wire

Wire Nut

Motor

Switch Box

White Wire

Terminal (Groove)

Terminal ( Tongue)

Switch Box Cover

1. See Fig.1, Push the harp on the shade onto the candle tube.

2. See Fig.2, Install bulbs (not included). See relamping label at socket area or packaging for

maximum allowed wattage.

3. Remove the switch box cover from the fan by loosing the three screws.

4. Unscrew and discard the center plug from the switch box cover.

5. For fan style that is shown in Fig.3: Please attach the nipple of the light kit to the hole of the

switch box cover, then thread the wires through the washer and hex nut, and secure them tightly.

6. For fan style that is shown in Fig.4: Please attach the nipple of the light kit to the hole in the

center of the switch box cover, then secure the light kit with the two set screws (6x32 20mmL)

to switch box cover.

7. Cut the redundant wires if necessary. Pull out the wires from the switch box. Make wire connections

using the wire nuts:

---The smooth (marked) wire from the fixture to the black (or blue) wire from the switch box.

---The ridged (unmarked) wire from the fixture to the white wire from the switch box.

Carefully tuck the wires back into the switch box.

8. Attach the switch box cover back to the switch box using the three switch box screws.

9. Turn on the power at the main fuse or circuit breaker box. (You can control the light with the

pull chain.)



Fig.1

Shade

Harp

Candle

Tube

Bulb

For Light Kit:

060217

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. The combined weight of your ceiling fan and light kit cannot exceed 35 pounds unless

additional support is provided for the fan.

LK33053

LK33053 --- Page 1

1 2

Summary of Contents

Page 1 - INSTRUCTIONS

Fig.3MotorSwitch BoxWhite WireRidged WireRidged WireHex NutScrewSwitch Box CoverNippleLight KitWire NutSmooth WireSmooth WireWasherCenter PlugLight Ki

Page 2 - For Mini Chandelier:

1. Attach the nipple(-a) to the mounting strap, then secure it with a washer and hex nut. 2. Attach the mounting strap to the outlet box by usin

Comments to this Manuals

No comments

AireRyder LK33053WP Instruction Manual

Browse online or download Instruction Manual for Household fans AireRyder LK33053WP. AireRyder LK33053WP Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Household fans AireRyder LK33053WP